用户登录

作废 BS 4871-3-1985 按认可焊接工艺操作的焊工鉴定考试规范.第3部分:金属管与管板接头之间的电弧焊Specification for approval testing of welders working to approved welding procedures - Arc welding of tube to tube-plate joints in metallic materials

作废 BS 5210-1975 闪烁器的标准尺寸规范Specification for standard dimensions of scintillators

作废 BS 5213-1975 微生物学用医疗样品容器规范Specification for medical specimen containers for microbiology

作废 BS 4805-1989 长方形铺地织物尺寸的测定方法Method for determination of the dimensions of rectangular textile floor coverings

作废 BS 5117-2.5-1985 发动机浓缩冷却剂(抗冻剂)的腐蚀抑制试验.第2部分:腐蚀抑制性能试验方法.第2.5节:现场试验Testing corrosion inhibiting, engine coolant concentrate (’antifreeze’) - Methods of test for corrosion inhibition performance - Field test

作废 BS 5188-1990 容积达1.4L、直径为85mm的液化或压缩不可燃气体用的一次性金属容器Specification for non-refillable metallic containers up to 1.4 litres capacity and 85 mm diameter for liquefied or compressed non-flammable gases

作废 BS 4739-2-1979 阴极射线示波器特性的表示方法.存储示波器Method for expression of the properties of cathode-ray oscilloscopes - Storage oscilloscopes

作废 BS 5117-1.4-1985 发动机浓缩冷却剂(抗冻剂)的腐蚀抑制试验.第1部分:测定物理和化学特性的试验方法.第1.4节:发泡特性测定Testing corrosion inhibiting, engine coolant concentrate (’antifreeze’) - Methods of test for determination of physical and chemical properties - Determination of foaming characteristics

作废 BS 5117-2.4-1985 发动机浓缩冷却剂(抗冻剂)的腐蚀抑制试验.第2部分:腐蚀抑制性能试验方法.第2.4节:静态发动机试验Testing corrosion inhibiting, engine coolant concentrate (’antifreeze’) - Methods of test for corrosion inhibition performance - Static engine test

作废 BS 5114-1975 聚乙烯管用连结件和压制配件的性能要求规范Specification for performance requirements for joints and compression fittings for use with polyethylene pipes

作废 BS 5117-1.3-1985 发动机浓缩冷却剂(抗冻剂)的腐蚀抑制试验.第1部分:测定物理和化学特性的试验方法.第1.3节:冻结点测定Testing corrosion inhibiting, engine coolant concentrate (’antifreeze’) - Methods of test for determination of physical and chemical properties - Determination of freezing point

作废 BS 4630-1970 氧化三丁基锡规范Specification for tributyltin oxide (di(tributyltin) oxide)

作废 BS 5077-1974 同BS 4507规定的润滑脂筒配合使用的润滑脂枪(手动操作杆型)规范Specification for grease guns (hand-operated lever type) for use with cartridges complying with BS 4507

作废 BS 5101-4-1980 带控制互换性和安全性量规的灯头和灯座规范.第1、2或第3部分中未作规定的英国用灯头、灯座和量规Specification for lamp caps and holders together with gauges for the control of interchangeability and safety - Lamp caps, lampholders and gauges used in the United Kingdom but not specified in Parts 1, 2 or 3

作废 BS 4618-5.3-1972 塑料设计数据表示方法推荐标准.第5部分:其它特性.第3节:光学特性Recommendations for the presentation of plastics design data - Other properties - Optical properties

作废 BS 4F 57-1990 航空航天用充气设备的擦净棉织物规范Specification for scoured cotton fabric for inflatable equipment for aerospace purposes

作废 BS 5074-1974 精密测量用各种长短杆式温度计规范Specification for short and long solid-stem thermometers for precision use

作废 BS 4618-4.2-1972 塑料设计数据表示方法推荐标准.第4部分:环境和化学效应.第2节:耐自然老化性Recommendations for the presentation of plastics design data - Environmental and chemical effects - Resistance to natural weathering

作废 BS 4993-4-1980 工业用氟化铝的试验方法.第4部分:试样的制备和贮存Methods of test for aluminium fluoride for industrial use - Preparation and storage of test samples

作废 BS 4A 4-1966 飞行器用金属材料试样和试验方法规范.米制单位Test pieces and test methods for metallic materials for aircraft - Metric units