用户登录

现行有效 QJ 763-1983小型组合模零件技术条件

作废 QJ 755-1982无导柱圆形后次压延模典型组合

现行有效 QJ 2507-1993碳素材料微观结构参数测试方法

作废 QJ 2514.8-1993冷冲模模板 圆形垫板

作废 QJ 98-1983机床夹具零件及部件 支座

现行有效 QJ 2932-1997航天器和导弹武器系统安全性评审指南

作废 QJ 614-1981机箱附件 限制器

现行有效 QJ 3277-2006液氧煤油发动机试验方法

现行有效 REG 49 CFR 571 72 FR 28939-2007Hydraulic and Electric Brake Systems, Air Brake Systems Proposed Rules

现行有效 ITU-R F.1494-200010.7 GHz ~ 12.75 GHz 频段保护固定业务免受共享的其他业务的时变总干扰的干扰标准

现行有效 QJ 773.34-1983小型组合冲模 拼合弯曲凹模

作废 QJ 990.3-1986涂层检验方法 涂层厚度检验方法

现行有效 QJ 2937-1997卫星大型试验质量管理要求

现行有效 GME GME 60401-2007Gitterschnittprung von organischen Beschichtungen Cross Hatch Test of Organic Coatings English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14829 [Replaced: GME OPEL 4206A]

作废 QJ 757-1982无导柱矩形首次压延模典型组合

现行有效 ITU-R F.1487-2000使用电离信道模拟器的带宽高达 12kHz 的高频 (HF) 调制解调器的测试

现行有效 SAE AS 21937-1998Nut, Cluster Fitting, Retainer FSC 4730; Should Be Used Instead of MS21937

现行有效 SN/T 2757-2011植物线虫检测规范

现行有效 SAE ARP 715A-1982Performance Acceptance Testing of Air Turbine Starters R(1988)

现行有效 SAE AMS 3678/4-1999Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions

现行有效 SAE AMS 2810F-1988Identification and Packaging Elastomeric Products R(2000)

现行有效 SAE AMS 4415-2008Aluminum Alloy Extrusions 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T76511, -T76510) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged

现行有效 SAE AIR 5455-2003Impact of Changes in Test Dust Contaminants and Particle Counter Calibration on Laboratory Filter Element Performance and Fluid Cleanliness Classes

现行有效 SAE AMS 4214H-2001Castings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Stabilized UNS A03550

现行有效 SAE AS 5491C-2007Calculation of Electron Vacancy Number in Superalloys

现行有效 SN/T 2762-2011进出口石墨中氟含量的测定 离子色谱法

现行有效 SAE AMS 3897/1-1988Carbon Fiber Cloth 8HS Style Fabric Epoxy Resin Impregnated R(1994)

现行有效 SAE J638-2011Motor Vehicle Heater Test Procedure

现行有效 SAE AMS 3678/2A-2010Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions

现行有效 AS/NZS 1580.481.1.13-1998Paints and related materials - Methods of test - Coatings - Exposed to weathering - Degree of fungal or algal growth